Lowongan Kerja PT Berca Engineering Indonesia 10 Posisi

PT Berca Engineering merupakan sebuah perusahaan di Indonesia yang fokus pada bidang teknik dan konsultasi teknik. Perusahaan ini menyediakan layanan perencanaan, desain, pengembangan, implementasi, dan pemeliharaan sistem teknik untuk proyek-proyek di berbagai sektor, termasuk industri, infrastruktur, dan bangunan.

PT Berca Engineering telah berdiri sejak tahun 1981 dan telah mengerjakan berbagai proyek besar di Indonesia dan luar negeri. Perusahaan ini memiliki tim profesional yang terdiri dari insinyur dan arsitek berpengalaman yang memiliki keahlian di bidangnya masing-masing. Beberapa proyek besar yang pernah dikerjakan oleh PT Berca Engineering antara lain pembangunan pabrik kimia, pembangunan fasilitas produksi minyak dan gas, pembangunan jalan tol, pembangunan bandara, pembangunan stasiun listrik, dan pembangunan gedung perkantoran.

Lowongan Kerja PT Berca Engineering

Position: 

1. PROCESS ENGINEER (SENIOR, MIDDLE & JUNIOR ENGINEER)
2. TECHNICAL PROCESS SAFETY ENGINEER (SENIOR, MIDDLE & JUNIOR ENGINEER)
3. CIVIL STRUCTURAL ENGINEER (SENIOR & MIDDLE ENGINEER)
4. INSTRUMENT ENGINEER (SENIOR, MIDDLE & JUNIOR ENGINEER)
5. DESIGNER (CIVIL STRUCTURAL DESIGNER, PIPING DESIGNER, INSTRUMENT DESIGNER & ELECTRICAL DESIGNER)
6. MECHANICAL ROTARY PACKAGE & MACHINERY ENGINEER (SENIOR, MIDDLE & JUNIOR ENGINEER)
7. MECHANICAL STATIC ENGINEER (SENIOR, MIDDLE & JUNIOR ENGINEER)
8. PIPING ENGINEER (SENIOR & MIDDLE ENGINEER)
9. ELECTRICAL ENGINEER (SENIOR, MIDDLE & JUNIOR ENGINEER)
10. DOCUMENT CONTROLLER

WE ARE HIRING

1. POSITION : PROCESS ENGINEER (SENIOR, MIDDLE & JUNIOR ENGINEER)

Requirements:
• Indonesian Citizen
• Min. 7 years (Senior) and 3 years (Engineer) experience in Oil and Gas Company, from engineering consultant is preferred.
• Having min. 1 year (Junior) experience working at Oil and Gas Engineering Consultant.
• Bachelor Degree in Chemical Engineering.
• Min. GPA 3.00
• Experiences in engineering design covers from Pre-FEED, FEED stage to Detailed Engineering Design stage for both onshore and offshore oil and gas facilities.
• Familiar with engineering software such as: HYSYS, ASPEN EDR, ASPEN FLARE SYSTEM, HTRI, Pipesim, Pipepahse, etc.
• Familiar with international standard, code and recommended practice (API, ASME, ANSI, TEMA) relating with process requirement.

2. POSITION : TECHNICAL PROCESS SAFETY ENGINEER (SENIOR, MIDDLE & JUNIOR ENGINEER)

Requirements:
• Indonesian Citizen
• Min. 7 years (Senior) and 3 years (Engineer) experience in Oil and Gas Company, from engineering consultant is preferred.
• Having min. 1 year (Junior) experience working at Oil and Gas Engineering Consultant.
• Bachelor Degree in Chemical Engineering.
• Min. GPA 3.00
• Experiences in engineering design covers from Pre-FEED, FEED stage to Detailed Engineering Design stage for both onshore and offshore oil and gas facilities.
• Familiar with formal safety studies, such as FERA, QRA, SIL, EERA, SITTING STUDY, etc., is preferred but not essential.
• Familiar with international codes, such as API, NFPA, IP, NORSOK, ISO, OSHA, etc., and local regulations.
• Has previous experience in facilitating any process safety workshop.
• Familiar with engineering software such as: PHAST, Flaresim, Pipenet, etc.

3. POSITION : CIVIL STRUCTURAL ENGINEER (SENIOR & MIDDLE ENGINEER)

Requirements:
• Indonesian Citizen
• Min. 8 years (Senior) and 5 years (Engineer) of working experience in the related field is required for this position in Oil & Gas Project (Offshore Project)
• Having experience working at Oil and Gas Engineering Consultant
• Bachelor Degree in Civil Engineering / Ocean Engineering
• Min. GPA 3.00
• Experiences in engineering design from Pre-FEED, FEED stage to Detailed Engineering Design (DED) stage for both onshore and offshore oil and gas facilities
• Familiar with Mathcad Software
• Familiar with Local & International code and capable with analysis Design software (Staadpro / Sacs and other Geotechnical/ plaxis and Hydro/ Hec-Ras are advantage )

4. POSITION : INSTRUMENT ENGINEER (SENIOR, MIDDLE & JUNIOR ENGINEER)

Requirements:
• Indonesian Citizen
• Min. 7-8 years (Senior) and 3-5 years (Engineer) experience in Design Engineering Oil and Gas Industry.
• Having min. 1-2 year (Junior) experience working at Oil and Gas Engineering Consultant.
• Bachelor Degree in Physics Engineering
• Experiences in instrument engineering design at stage Pre-FEED, FEED, Detailed Engineering, for onshore and offshore oil and gas facilities
• Familiar with international code and standards such as API, ISA, IEC
• Have experience in Instrucalc Calculation Software
• Have experience in Consulting Design Engineering Company is a MUST
• Placement Location: Cikini, Jakarta
• Experience in Telecom engineering is a plus point

5. POSITION : DESIGNER (CIVIL STRUCTURAL DESIGNER, PIPING DESIGNER, INSTRUMENT DESIGNER & ELECTRICAL DESIGNER)

Requirements:
• Indonesian Citizen
• Min. 4- 9 years of working experience in the related field is required for this position in Oil and Gas Project (Onshore & Offshore Project)
• Min. Senior High School / Diploma in engineering disciplines
• Have experience in Consulting Engineer & Fabrication Company is a MUST
• Experd with autocad 3D software, etc
• Has a good communication and interpersonal skill

6. POSITION : MECHANICAL ROTARY PACKAGE & MACHINERY ENGINEER (SENIOR, MIDDLE & JUNIOR ENGINEER)

Requirements:
• Min. 8 years (Senior) and 4 years (Engineer) experience in Oil and Gas Company, from engineering consultant is preferred
• Having min. 1-2 years (Junior) experience working at Oil and Gas Engineering Consultant
• Bachelor Degree in Mechanical Engineering
• Min. GPA 3.00
• Experiences in engineering design covers from Pre-FEED, FEED stage to Detailed Engineering Design stage for both onshore and offshore oil and gas facilities.
• Have experiences handling for Pumps (API 610, 675, 676 / ANSI / NFPA 20), Air Compressor, Gas Compressor Package, Blower, Water Treatment Package, Chemical Injection Package, Nitrogen Generator Package, Cooling Tower, Flare & Ignition Package, etc.
• Understand Process, Electrical, Instrument & Control Requirement.
• Familiar with international code and standards such as ASME, API, ANSI, NFPA, NACE, AGMA, Etc.

7. POSITION : MECHANICAL STATIC ENGINEER (SENIOR, MIDDLE & JUNIOR ENGINEER)

Requirements:
• Indonesian Citizen
• Min. 8 years (Senior) and 4 years (Engineer) experience in Oil and Gas Company, from engineering consultant is preferred.
• Having min. 1-2 years (Junior) experience working at Oil and Gas Engineering Consultant.
• Bachelor Degree in Mechanical Engineering.
• Min. GPA 3.00
• Experiences in engineering design covers from Pre-FEED, FEED stage to Detailed Engineering Design stage for both onshore and offshore oil and gas facilities.
• Have experiences handling Pressure Vessels, Pig Launcher / Receiver, Storage Tank (API 650 / 620), Spare Tank, Heat Exchangers (ACHE / STHE / Plate HE. / Brazed Al. Plate Fin HE / Heater), etc.
• Familiar with international code and standards such as ASME, API, ANSI, NACE, ASCE, UBC, TEMA, ALPEMA, Etc.
• Have experience in Consulting Engineer Company is a MUST
• Understand in Design, Fabrication and installation / erection of Pressure Vessel, STHE and Tank.
• Having Skill for Software (AME Tank & Compress)

8. POSITION : PIPING ENGINEER (SENIOR & MIDDLE ENGINEER)

Requirements:
• Indonesian Citizen
• Min. 8 years (Senior) and 5 years (Engineer) of working experience in the related field is required for this position in Oil & Gas Project (Offshore Project)
• Having experience working at Oil and Gas Engineering Consultant
• Bachelor Degree in Mechanical Engineering / Material Engineering
• Min. GPA 3.00
• Experiences in engineering design from Pre-FEED, FEED stage to Detailed Engineering Design (DED) stage for both onshore and offshore oil and gas facilities
• Familiar with international code and standards such as ASME, API, ASTM, MSS, NACE
• Have experience in piping design, material engineering and pipe stress analysis

9. POSITION : ELECTRICAL ENGINEER (SENIOR, MIDDLE & JUNIOR ENGINEER)

Requirements:
• Indonesian Citizen
• Min. 8 years (Senior) and 4 years (Engineer) experience in EPC oil and gas, petrochemical, power plant, etc.
• Having min. 1-2 years (Junior) experience working at Oil and Gas Engineering Consultant.
• Bachelor Degree in Electrical Engineering.
• Min. GPA 3.00
• Experiences in engineering design covers from Pre-FEED, FEED stage to Detailed Engineering Design stage for both onshore and offshore oil and gas facilities
• Familiar with international code and standards such as ANSI, IEC, IEEE, NEC, NEMA)
• Familiar and capable with Power system analysis in ETAP

10. POSITION : DOCUMENT CONTROLLER

Requirements:
• Indonesian Citizen
• Min. 8 years (Senior) and 4 years (Engineer) experience in Oil and Gas Company, from engineering consultant is preferred.
• Min. Diploma / Bachelor Degree in engineering disciplines
• Min. GPA 3.00
• Experiences in engineering design covers from Pre-FEED, FEED stage to Detailed Engineering Design stage for both onshore and offshore oil and gas facilities
• Experienced working on engineering project for Pertamina Hulu Rokan (formerly Chevron Pacific Indonesia) is preferable
• Familiar with Documentum is preferable

Kindly send your qualified CV, related Certificate, and other attachment to: 

be-hr@bercaengineering.co.id

Send email with your subject: Position_Your Name (Example: Piping Engineer_Rayyan).

Only shortlisted candidates will be contacted. Appreciated your positive response.

Expiry date: May 08, 2024
Please Submit: Not Later than May 30th , 2024

Mohon perhatian!

• Kami mengingatkan agar selalu berhati-hati terhadap segala jenis penipuan dalam lowongan pekerjaan. 
• Semua proses rekrutmen yang diinformasikan oleh LokerEnergi adalah gratis dan tidak meminta biaya apapun. 
• Mohon tidak memberikan uang tunai atau melakukan transfer jika diminta oleh pihak manapun. 
• Jika Anda menemukan lowongan pekerjaan yang terindikasi sebagai penipuan, silakan laporkan kepada kami.

Berikut adalah beberapa tips dalam mencari pekerjaan:
1. Buatlah CV yang menarik, kreatif, dan unik. CV yang Anda buat harus mudah dibaca oleh perekrut atau HRD.
2. Cantumkan informasi pribadi seperti nama, alamat domisili, nomor telepon, email, umur, dan tinggi (jika ada).
3. Deskripsikan tentang diri Anda dan pencapaian yang telah Anda raih.
4. Tuliskan pengalaman yang dimiliki, meskipun hanya sebatas magang. Cantumkan nama perusahaan, bulan, dan tahun mulai bergabung.
5. Sebutkan posisi yang diinginkan, nama perusahaan, bulan, dan tahun mulai bergabung.
6. Jangan lupa untuk mencantumkan pendidikan Anda seperti nama universitas/sekolah dan bulan/tahun